Snaplytics Toolkit

音频与麦克风 — 测试与工具

所有音频与麦克风类别的免费工具都在这里——每项测试都能在浏览器中立即运行。无需安装,无需注册。

麦克风测试

实时麦克风检测

在浏览器中测试你的麦克风——说话并观察实时波形和分贝表,检查峰值电平和本底噪声,还可以录制一小段音频,听听麦克风采集到的真实声音。不会上传任何数据。

打开测试

Voice Recorder

Record & save your voice

Record your voice online — an in-browser dictaphone with pause and resume, a live waveform, and a player and download for every take. Everything stays on your device; nothing is uploaded.

打开测试

声音测试

检测扬声器与耳机

在浏览器中测试你的扬声器、耳机或耳塞。播放左声道、右声道或双声道的音调,在立体声场中来回扫描,几秒钟内就能知道是否有一侧没有声音。

打开测试

频率响应测试

听遍设备的全频段

在整个音频频谱范围内测试你的耳机或音箱。通过滑块、预设或全频段扫描播放 20 Hz 到 20 kHz 的纯正弦音,准确找出设备开始衰减、失真或彻底静音的位置。

打开测试

音调发生器

任意音高,四种波形

生成 20 Hz 到 20 kHz 之间的稳定音调。可选择正弦、方波、锯齿或三角波,精确设置 Hz 数值或乐音音名,并可左右平移声像。

打开测试

Metronome

Keep perfect time

Free online metronome from 20 to 260 BPM. Set the tempo with a slider or tap it in, accent the first beat of the bar, and practice to a sample-accurate click with a beat indicator and measure counter.

打开测试

Room Acoustics Test

Hear where your room smears

Test your room acoustics with MATT-style gated tone bursts. Sweep a crisp Ta-Ta-Ta pattern through your speakers and mark the frequencies where the room blurs the bursts into a smear — the classic articulation test, right in the browser.

打开测试

Test Tones

THD & perceptual sweep

Play calibrated test tones in the browser. Step a 1 kHz sine through exact THD levels from 0.001% to 5% and find the distortion you can actually hear, or run a perceptual 20 Hz–20 kHz sweep that should sound evenly loud from end to end.

打开测试

低音测试

你的设备能下潜多深?

测试你的低音炮、音箱或耳机到底能下潜多深。播放 20 到 200 Hz 的纯正弦音——点击预设、用滑块微调,或扫描整个低音范围,准确记录低频消失的临界点。

打开测试

Dynamic Range & Dithering Test

Hear what bit depth does

Hear quantization, dithering, and noise shaping for yourself. A pulsing tone steps from 0 down to −90 dBFS, requantized live to 4–16 bits — plain, dithered, or noise-shaped — so you can find exactly where each version disappears.

打开测试

Subwoofer Test

Kick drums down to 20 Hz

Test your subwoofer with six synthesized kick drums stepping down from 70 to 20 Hz — each should get deeper, never louder — then sweep one channel from 200 to 40 Hz to find the frequency where bass stops being localizable and set your crossover below it.

打开测试

环绕音效测试

检测 5.1 与 7.1 音箱

检测立体声、5.1 或 7.1 系统中的每一个扬声器。点击房间示意图上的某个扬声器,即可单独播放该声道的测试音,也可自动轮播全部声道,并用 30–120 Hz 低音扫描检查低音炮。

打开测试

分贝计

实时测量音量水平

直接在浏览器中用麦克风测量音量。实时分贝读数提供估计 dB SPL 或精确 dBFS,附带峰值、平均值和最小值统计,以及常见声音的参考对照表——不会录音,也不会上传任何数据。

打开测试

Hearing Test

Find your frequency range

Test your hearing range in the browser. A pure tone sweeps down from 22 kHz — tap the moment you hear it to find your upper limit, then a second sweep rises from 10 Hz for your low end, with an age-typical comparison for your result.

打开测试

耳机测试

左右声道检测

在浏览器中测试你的耳机或头戴式耳机——播放左声道、右声道或双声道的音调,扫描立体声场,检查平衡和接线极性,并测验自己能否分清左右耳。

打开测试

Stereo Test

Channels & sound localization

Test your stereo setup in the browser. Check the left and right channels and the phantom center, hear the level, timing, and head-shadow cues your brain uses to place a sound, and take a 10-round quiz on where a knock comes from.

打开测试

Audio Blind Test

Can you hear the difference?

Blind test your hearing with real statistics. Guess whether a mystery music clip is 16-bit or crushed to 8-bit, and whether a hi-hat lands in sync with the kick or milliseconds late — vote round by round and see if your score beats pure guessing.

打开测试